Talking about the key points of customized heat pump dryer

      For the heat pump dryer with a wide range of uses, it is common to customize the equipment. Different regions and customers have different raw materials for drying, and different sizes and models are required. Many manufacturers have customized the heat pump dryer after communicating with customers. What should be paid attention to when customizing the heat pump dryer?

      1. It mainly considers the external environment temperature, appropriate temperature, output, site and other factors, and then selects according to the technical parameter table of heat pump dryer.

      2. There are many manufacturers of heat pump dryer in the industry, and the product quality and brand strength are also uneven. The choice of host brand is particularly important. We also need to pay more attention to the host brand when purchasing.

      3、 The drying method of the heat pump dryer belongs to the static chamber, which is matched with the corresponding drying chamber. It needs to be determined according to the nature of the material, the amount of drying and the actual situation of the customer. If the body of the heat pump dryer does not match with the heat pump of the main engine, the temperature will be too low or too high, the negative circulation mode of the drying chamber is different, and the drying speed and effect of the circulation air mode of different materials are different, which will also affect the configuration of the main engine.

      4、 The key of the heat pump drying system is to master the drying process, which is also the main factor affecting the drying quality and the user's own interests. The material drying generally includes two ways: constant temperature and constant humidity timing and drying curve. Some materials with low drying requirements and low material value mostly adopt constant temperature and constant humidity timing, while most materials need to reasonably control the drying temperature and humidity curve in different stages, To ensure the quality of finished products.

      5. A reasonable drying process often requires multiple tests. After each test, the system is adjusted according to the recorded data. The process requirements of different materials are different, and the performance of the same product in different areas may be different. On the premise of understanding the material properties, drying amount, material dehydration, drying cycle and other factors, select the appropriate host type, and refer to the traditional drying process Drying test.

      6. For the powerful heat pump dryer manufacturers, they need not only complete qualifications, but also precise processing equipment, perfect quality management system and thoughtful after-sales service system.