How to maintain the heat pump drying room in summer

      The temperature is very high in summer, which is harmful to the heat pump drying room. The high temperature is easy to cause the heat pump drying room to malfunction and affect its normal use. In order to prolong the service life of the drying room and maintain the efficiency of the equipment in actual production, it is necessary to carry out large-scale maintenance work on the heat pump drying room. How should we carry out the summer maintenance?

      1. It is hot and rainy in summer. During this period, try not to make the drying room work fatigued. Long time continuous work is easy to cause high temperature aging of the machine. Therefore, every 20 hours of work, give it 4 hours of rest time. When starting the machine, routine inspection should be carried out, such as tightening screws, adding grease, checking vibration, etc.

      2. In order to avoid too high temperature in the drying room (generally below 50 degrees is the best), it is recommended to use lubricating oil suitable for high temperature in summer to increase the lubricating degree of machine operation, ensure the flexibility of machine operation and reduce friction heat generation. In addition, if the bearing oil temperature rises, the cause should be checked immediately to eliminate.

      3. Pay attention to whether there is aggregate, blocking and sticking in some part of the drying room all the time. If so, clean it immediately. In case of sudden power failure, the heat source switch and all power switches should be turned off first, and then the equipment can be cleaned up after the cylinder temperature of drying room is normal.

      4. Due to strong sunshine in summer, attention should be paid to the place where the drying room is placed to avoid placing inflammable and explosive materials, such as lighters, air fresheners or flammable plastic products, which are potentially dangerous and prone to explosion and other accidents.

      To sum up, it is about the maintenance of the heat pump drying room. I hope you can understand it after reading it. If you still have any questions, you can call our company for telephone consultation.